Ultimaker S3

Build: 230 x 190 x 200 mm (9 x 7.4 x 7.9 inches)

Getting Started

  • In CAD software of choice (Solidworks, Fusion 360, Onshape, etc) export your design as an STL file.
  • Open the STL file in UltiMaker Cura slicing software. (Already installed on PIL computers)
    • Configure print settings (material, layer height, infill density, supports, adhesion, etc)
  • Send to print via configured cloud print
    • If stuck, use USB to transfer file to printer





Checkout the other Maker Spaces on Campus for additional fabrication resources!